SG701
Replaced by SG718SAB GOBLIN 700 RED (With main and tail blades)
General Specifications
Electronic Specifications
Main rotor diameter: 1568mm (with 690mm blades)
Main blade length: 690 to 710mm
Tail rotor diameter: 296mm
Tail blade length: 115mm
Main shaft diameter: 12mm
Tail shaft diameter: 6mm
Spindle diameter: 10mm
Weight including electronics 3470g (excluding batteries).
Maximum motor size: 64mm diameter, maximum height 64mm
Battery compartment: 60x58x350mm (adaptable to 64x58x350mm)
Main Motor: Up to 62mm diameter motor can be used
Maximum Battery Size: 60mm x 58mm x 350mm
Cyclic Servos: High torque servos highly recommended
Tail Servo: High speed, digital servo recommended
Ratio
18T Pinion = ratio 11.3:119T Pinion = ratio 10.7:1
20T Pinion = ratio 10.2:1
21T Pinion = ratio 9.7:1
22T Pinion = ratio 9.3:1
23T Pinion = ratio 8.9:1
24T Pinion = ratio 8.5:1
26T Pinion = ratio 7.8:1
With Scorpion motor HK LE 4525-520,
normal flight= 20T
Hard 3D= 21T
Package Includes:
Included:
(1) SAB Goblin 700 – Kit Only
(1) SAB 690mm Carbon Fiber Main Rotor Blade Set
(1) SAB 115mm Carbon Fiber Tail Rotor Set
What’s Needed for Flight:
(3) Cyclic Servos – High Torque Recommended
(1) Tail Servo
(1) Brushless Main Motor
(1) Brushless ESC
(2) 6S 22.2V LiPo Battery – 12S 44.4V System
(1) Flybarless Gyro
(1) 7+ Channel Transmitter
(1) 7+ Channel Receiver
(1) LiPo Battery Charger
Kit Notes:
SAB Goblin 700 comes as a kit form, requiring a complete build and all necessary electronics. Kit is designed for advanced pilots only.
Disclaimer: SAB Heli Division does not endorse any of the electronic components listed. These are only suggestions based on our own testing. Please make sure to do your own research to ensure compatibility between these components, specially between motors and ESCs.